copyright :Dieter Bedenknecht NZ.-06-2000 Practice cuts Before you start your project try and do the practice cuts on 2 and
3mm clear glass, until you feel confident enough to go on to the real
thing. 
When cutting a straight line, cut from the top down and break.Try
cutting wider pieces which you can break with your hands and thinner
pieces using your grozing pliers. 
Draw some squiggly lines onto your glass and cut from the bottom of
the glass upwards,following the drawing line, then break. 
Draw some simple curves onto the glass and cut the curve from the
bottom upwards, following your drawing line, then break. |
