copyright by Dieter Bedenknecht -06-2000 
This may be easy but is also very important.Select the design you
wish to do ( there are designs for you at the back of this book).You
now have to make cardboard patterns after which you will then cut
the glass. For this you will need : 1.A design
2.A piece of thin cardboard.
3.Carbon paper 
Trace your design onto the cardboard using the carbon paper in between.Make
sure you do this carefully and accurately.When you've done this, but
before you take the design off the carbon paper and cardboard number
each individual piece and put in the colour you want to use.(Also
write the colours on the paper next to the design, if you dont do
all this you'll have a jigsaw to sort later.)Now you can lift the
design from the cardboard and start cutting out all the pieces, remembering
to cut off the drawing line, to reduce the size. 
Lets get started..... 
|
